I Love Fall: DIY Autumn Wreath!

Hi Everyone!

I am back with a fairly easy, yet time-consuming DIY project for Autumn. I love Autumn! It's my favourite time of year. I love the crispness of the fall air and the beautiful colours that come with the changing of the seasons. Today, I'm bringing you a DIY Autumn Wreath for your front door. Like I said, it is easy and fairly cheap but it is a bit time-consuming. Be sure you have the time... or start it and then come back to it later. Let's get started!

Things You Need:
-grapevine wreath
-fake autumn foliage
-scissors
-hot glue sticks
-hot glue gun
-ribbon
-wreath holder for the door
-wooden letter (optional)
-paint
-paintbrush

Step 1:
Cut the foliage so that it isn't in a big bunch. (This is how you buy it at the store). Once you have separated all the pieces, decide on the colours you want, which ones you want to use etc. (NOTE: make sure you leave a few inches of the stem on each piece - do NOT cut it right under the leaf or flower etc).

Step 2:
Carefully, start placing the foliage in between the vines of the wreath. You may have to really work it into some places. i struggled a bit with some of my pieces. But once they are in, they are in. (NOTE: I hot glued some of mine in that weren't staying between the vines).

Step 3:
Once you have all the foliage the way you want it (don't be afraid to get creative and play around with it), you can take your ribbon and cut off a considerable piece. I just made a simple bow and glued it in a spot I felt had a little less going on.

Step 4:
Next, paint your wooden letter in the colour that you desire, if you have decided to do this step. I had this wooden letter as a decorative piece on one of the tables at our wedding. I didn't know what else I was going to do with it so I glued it to this wreath. You will need a lot of glue for this part. I also recommend getting a slightly lighter wooden letter, as mine is heavy and the wreath becomes lopsided easily. Once the letter is dry, glue it to the wreath.

Step 5:
Let the glue you put on dry. Once it is ready, take your wreath door hanger (I got mine at Dollarama) and attached it to your front door (or wherever you plan to put this). Then put the wreath on the front of the door. And voila! You are finished a beautiful Autumn Wreath for your door.

I hope that you enjoyed this DIY post! I had an enjoyable time making this wreath. I might do one for Christmas as well. Other than the wooden letter, I bought all the materials for this project at the dollar store! If you do this project yourself, I would love to see them. Post them in the comments below! Happy Crafting!!! xoxo

I Love Fall: DIY Fall Arrangements!

Hi my crafty friends!

Hope you all are staying warm on this chilly day! So today, I'm posting about a DIY that I did for Fall over the weekend. It took about an hour to do both arrangements. It was fairly easy and budget friendly. Let's get started!

Things you will need:
-scissors
-vase
-rocks/sand/pebbles
-different fall flower and leaf bunches
-ribbon


Step 1: 
Cut all the flowers and leaves off the main stem. Be sure to leave a stem on the actual flower that is about 3 or 4 inches long. If you can't, that is fine. Just make it as long as you can.

Step 2:
Take your vase and fill it with whatever filler you have chose. In one of my vases, I used gold rocks I had around the house and in the other, I used the pebbles that you put in a fish aquarium. I had leftovers from when I made my centrepieces for my wedding reception.

Step 3:
Next wrap the ribbon around the outside the vase. This step is optional. You don't need to wrap ribbon around the vase.

Step 4:
Now, start putting your fall foliage into the vase. Play with it until you get it how you want it. Once you are happy with it, you are done!

Wasn't that easy? I made two in an hour and a half. Remember that there is no bad looking arrangement. It's up to you and what you like. Get creative with it! I hope my first Fall DIY was enjoyable! I'm going to be doing more in the next month or so, so be sure to check back periodically! Happy Crafting! xoxo

Wedding DIY: Easy Seating Chart!

Hey Everyone!

Hope you all are having a great Wednesday afternoon! Today, I've got an easy DIY for those of you who are getting married! As you all may know, I got married a few months back so I thought I would share with you how I made my seating chart for the reception. You will only need a few things, it's that easy! Let's get started!

Things You Need:
-Picture frame
-Wrapping paper
-White Computer paper
-Computer/Laptop
-Printer
-Scissors
-Tape or Glue Stick

Step 1:
Buy a picture frame. I bought mine at Ikea for $20 (I think, I can't remember). Also buy some wrapping paper in your wedding colours. I found this at Michael's in the $1.50 bins.

Step 2:
Take the back off the frame. Take the fake picture out and use this as a guide for how big to make the wrapping paper background. I attached the fake picture that comes in the frame to my wrapping paper. Cut off the excess.

Step 3:
Next, take your computer/laptop and open a Microsoft Office (or the equivalent - I used Libre Office) and make your page landscape. Then format the page so that there is three columns. I chose a font similar to Brush Script and I centred everything. You will need to play around with until you get it exactly how you want it.

Step 4:
Once you have got it how you want it, print the page(s) out and cut them out as straight as you can. Then tape or paste them down. I found the easiest way to make sure it ended up centred in your frame was to take the border out of the frame and set it on top of wall paper. This allows you to see the area you have to work with. If you are doing a "Seating Chart" title, be sure to leave some space.

Step 5:
Once you have everything where you want it and glued down, go back to your computer and using the same font, type the words Seating Chart. Print it out and then cut it out. Glue it down in the space that you left. Put the border back in the frame. Then the wrapping paper and then the back of the frame. Once it is all back together, you are finished!

And there you have it! Pretty Simple eh? I hope you have enjoyed this Wedding DIY. If you are interested in other Wedding DIY's, be sure to check out my other Wedding DIY posts. And be sure to go over to The Britt Report to see more of my daily life and what I've been up to lately! Happy Crafting! xoxo

Re-Vamp that Bookcase You Dislike!!!

Hi Everyone!

So today, I'm coming at you with a very easy bookcase revamp! It literally took me like 10-15 minutes and I am so in love with how it turned out! It took a ugly, slightly damaged book case and made it a little more modern. It might be a little time consuming but not too much! Let's get started, shall we?

Things You Need:
-contact paper (in a cool pattern or colour)
-scissors
-ruler
-pencil

Step 1:
Clear off the shelves on your book case. If you need to, wipe them down. This is especially important to do for the back of the bookcase. You want to make sure the area you will be putting the contact paper is clean.

Step 2:
Take your ruler and measure the length and width of the back of each shelf (the area where the contact paper goes). Take the contact paper, turn it over and measure out what you measured for the back of the shelf. Carefully cut it out.

Step 3: 
Carefully peel the backing off the contact paper and stick it to the back wall of the bookcase. You may need to do this slowly and carefully. I had some air bubbles in mine. You can flatten these out for the most part but you may end up with crinkles. What I like about the pattern I chose is that you really can't see the crinkles.

Step 4:
Repeat the previous steps for each of the other shelves in your bookcase until you are finished. Put everything back on your bookcase and you are finished.

I hope you enjoyed re-vamping an old bookcase! I think it's a great way to save some money and to keep something and turn it into something better. I think I only paid six bucks for the contact paper at Canadian Tire as I had the rest of the materials already. Happy Crafting! xo

DIY Magnet Sign

Hi my fellow DIY-ers!

Happy September! I cannot believe that the summer is over and school starts tomorrow. With the spirit of getting organized in order to start a new school year off right, I came across a little DIY project on Pinterest a few weeks ago. It is a magnet sign for your dishwasher so those in your family will know whether the dishwasher is clean or not. It is a good way to let people know whether or not they can put things in dishwasher or if it needs to be emptied. In my household, this is going to come in handy because with my husband at work a lot and me at home, he never knows if I've turned it on or emptied it and I never know if he has looked after it while I was out or busy. It's a very simple little DIY that will only take an hour tops! Let's get started, shall we?

Things you will need:
-scissors
-sticker paper
-magnet (one large enough to write on)
-pencil
-markers

Step 1:
Place the magnet over top of the sticker paper. Take your pencil and trace around the outside of the magnet. Cut it out

Step 2:
Carefully, peel the backing off the sticker paper and place on the front side of the magnet (the side that is not magnetic). You may need to cut out more pieces from the sticker paper. I had to do this with mine so you couldn't see what was on the actual magnet.

Step 3:
Once, the magnet is covered to your satisfaction, take your pencil and split the space in half horizontally. On one side write Clean and then flip it around (so that Clean is upside down) and write Dirty.

Step 4:
Use your markers to design it however you like. Do this until you are satisfied with it. Then hang it on the magnetic part of the dishwasher. (Note* Make sure your magnet is strong enough to stay on the dishwasher. Mine is not, so I need to get a stronger magnet and attach it to my sign.

And that's it! You're done your magnetic sign for your dishwasher. Hope this was a good tutorial and that you had fun creating this sign. Happy Crafting! xo