Showing posts with label Holiday DIY. Show all posts
Showing posts with label Holiday DIY. Show all posts

Sunday, 18 March 2018

Crafting with Brittany: DIY Leprachaun Figurine

Hi Everyone!


I hope you are enjoyed St. Patrick's Day this year! First, I just wanted to apologize for not having this post up yesterday. I got really sick last weekend and was not able to do very much. Today, I am feeling a bit better than I have all week so I figured I would try and get this post done so I could publish it and get it out to you all! Like the title suggests, I am bringing you a St. Patrick's Day DIY. I saw this little guy on Pinterest and thought he was so cute! It can definitely be done on a budget but it is a bit of a time-consuming project so make sure you set some time aside to do it. With that being said, let's get started!


Things You Need:
- green felt (adhesive felt and regular felt)
- long-hair fur material
- glue gun
- glue sticks
-scissors
- ribbon
-gold sparkle washi tape
- pop bottle (I used a glass pop bottle)

Step 1:
Take the adhesive felt and attach it to the pop bottle. I made the felt go all the way up the bottle but you do not have to do this. The hat covers the neck of the bottle so it only needs to go to where the neck of the bottle starts.

Step 2:
This is the part that is tedious. First you want to cut a rectangular piece of felt large enough to fit over the neck of the bottle so that it goes over the entire neck of the bottle. Sew the two shorter ends together. 

Step 3:
Next, cut out a circle a little bigger than the circle that the cylinder you made above is. Then, sew the edge of the circle to the edge of one end of the cylinder. This creates the top of the hat. 

Step 4:
Finally, cut out a bigger circle. I used the bottle of the bottle as a guide. Cut it out and then cut a smaller circle inside the circle (you create a green donut... hahaha). I made the inside circle an inch in from the outer circle. This makes the rim of the hat. Put the cylinder inside the smaller circle, line up the edges and then sew the edge of the rim to the bottom edge of the cylinder. Flip it right side out and you have a hat for your leprechaun. 

Step 5:
Plug your glue gun in and wait for it to warm up. While you are doing that take your fur fabric and determine how long/short you want the leprechaun's beard to be... and where you want it to start on either side. (NOTE: Be sure to put the hat on your leprechaun so that you can make sure the hat covers the sides). When the glue gun is ready, glue the fur fabric where you want it. 

Step 6 (Optional): 
If you have one, you can glue a peach coloured pom-pom to the top of the fur fabric, right under the hat, so that your leprechaun has a nose. I didn't want to buy a big package of pom-poms just for this project so I opted not to put a nose. 

Step 7: 
The last step is to glue the ribbon and the little gold buckle to the hat. First, put a dot of hot glue in the middle if the ribbon and press down to the front and centre base of the hat. Do be careful not to burn yourself. Next take one end and wrap around to the back centre of the hat. Place a dot of glue and press the ribbon down onto the hat. Do the same for the ribbon on the other side. Next take a tiny bit of glue and glue the gold square down to the front and centre of the hat on top of the black ribbon. This is your gold buckle. 

Step 8 (Optional): 
If you want to, you can glue a 4-leaf clover into the ribbon on one side of the hat, like I did. Just put some glue on the back of the clover and place where you want it on the hat. 

So that is everything! I hope you all enjoy making this as much as I did. I thought it turned out so cute! He looked so adorable sitting amongst all my other St. Patrick's Day decor. I hope you had a great St. Patty's Day! Thanks so much for stopping by and until next time, Happy Crafting! xo

Monday, 26 February 2018

Crafting with Brittany: Sweetheart Tree DIY


Hi Everyone!

I hope you are having a wonderful weekend. So with this being the month of love, I felt inspired to do a Valentine's Day DIY, but nothing that was incredibly sappy. I was looking for something that could stay up in my home year round, should I wish it to. So after perusing Pinterest for awhile, I came across a canvas art project... it was some birch trees with a neutral background and on one of the trees was an painted etched-heart with two initials in it. I thought this was so sweet and could easily be left up year round, so I decided to attempt it. It has the potential to be on the pricier side of things, but if you use coupons and stuff you already own, you could definitely make it budget-friendly. Let's get into it, shall we?

Things You Need:

- Paintbrush
- Paint (neutral colour or stain if using a wood canvas, white and black)
- Canvas or Wood (I used a coupon at Michaels for a 20X20 inch wrapped canvas)


Step 1:
Paint your canvas with the background colour of your choice. I used the colour zinc grey as my house is pretty much grey in every room. Let this dry. You may need to do a second coat.

Step 2:
Paint on the birch trees or whatever type of tree you are planning on painting. Let this dry.

Step 3:
Take the black paint and use tiny amounts to make the heart shape etching in the tree. Then use a smaller brush, if needed, to make the initial carvings inside the heart. Let this dry.

Step 4: (Optional)
Take a sealant spray and spray the entire canvas evenly. Let this dry. Once dry, you can hang it wherever you like.

So that is it! I hope you all enjoyed this tutorial on how to do this. Be sure to let me know in the comments below if you attempt this DIY - I love seeing people's different takes on things. Thank you so much for stopping by and until next time, Happy Crafting! xo

Saturday, 27 January 2018

Crafting with Brittany: DIY Christmas Key Chain

Hello Everyone!

I hope you all have been having a fabulous week. Here in Ontario we had some pretty crazy weather at the beginning of the week. Hence, why today when I am writing this, I am curled up on my bed, in track pants and a sweater with some candles lit. I'm real exciting, aren't I? Anyway, as the title suggests, in this post, I am telling you how I made a keychain. This keychain was time consuming, but only because I had so much stuff included and it took me a bit to figure out how to attach some of the stuff. I wouldn't exactly call it budget-friendly either. You will be looking at spending some money - especially if you don't have any of the supplies already. All of the stuff is sold at Michaels, however, you may be able to find it in places such as Dollar Tree, Dollarama and independent craft stores.

Things You Need:
-key chain ring
-link rings
-pliers (if you have ones specifically for jewelry making, USE THEM!!!)
-beads
-various charm embellishments (bells, monogram letter, snowflakes, word plates etc)
-wire pieces (to thread the beads onto to create little bead charms - I'm not sure what these are actually called - but you can buy them at Michaels)

Step 1:
Take your key chain ring and your link rings and attach them together. Keep adding link rings until you have the length you desire.

Step 2:
Next, I took my embellishments and roughly placed them out where I wanted them to go. Play around with this until you are absolutely satisfied. Once you are satisfied, you can start adding them on using the link rings. Once you have finished putting on all the embellishments, put the keychain to one side to work on making the bead embellishments.

Step 3:
Take your beads, your wire pieces for the beads and your pliers and start making your little bead embellishments. For mine, I just stuck a large green bead on the wire and then stuck a small red one on top. I, then, took my pliers and bent the wire and twisted it around itself on top of the red bead. Repeat this step until you have as many as you would like on your key chain.

Step 4:
Once you have made all your bead embellishments, cut off any excess wire using little wire cutters (nail clippers also works - you will have to bend the wire while holding it with the nail clippers).

Step 5:
Finally, add these bead embellishments on the key ring links wherever you would like. Be sure to close the links up tight so they don't come off.

And there you have it! You're very own key chain. I love how well this turned out, despite it being the first time I am making a keychain. I hope you all liked reading about this DIY. If you attempt to do this DIY and you document it on Youtube or on your blog, be sure to let me know, so I can check yours out. Be sure to follow this blog as I will be posting every other week. Also check out my Youtube Channel where I will occasionally be posting DIYs there as well. Thank you so much for stopping by and until next time, Happy Crafting! xo



Wednesday, 15 November 2017

Deck the Halls with Brittany: DIY Rustic Advent Calendar

Hi Everyone!

So I am trying to get back into blogging regularly and am very exciting to be starting back at it with a Christmasy post. As the title suggests, I decided to tackle making my own advent calendar since I couldn't find one in stores that I really liked. And I'm going to share with you all how I've done it! This project is going to take a couple times - as there is a bunch of waiting involved! Let's get started, shall we?

Things You Will Need:
-wooden advent calendar (I got mine at Deserres for $40)
-stain or paint
-paint brush
-metal numbers (Tim Holtz @ Michaels)
-crazy glue
-items to put in the shadow box part (mini treasures aisle @ Michaels)
-sandpaper

Step 1:
 The first thing you will need to do is to sand the wooden advent calendar. It may have splinters and stuff so it will be good to sand these down so you don't injure yourself down the road. You will want to sand each individual box as well. After you have sanded everything, wipe down everything with a clean cloth.

Step 2:
  Next, take the stain and the paintbrush and stain the entire advent calendar. You might need to do this in stages. I took all the boxes out and did the large wooden box first. While I let that dry, I did the fronts and sides of each box. Then when everything was dry, I put the boxes back in. Once I figured out where they all went, I painted the inside of each little box and put it back in its square to dry. Leave this overnight.

Step 3:
  Once everything is dry, you can take your crazy glue and your metal number and glue them on. In what order you glue them is up to you. I opted to put them on each box randomly instead of in numerical order. Make sure you don't use a lot of glue and be careful when handling the metal numbers - you don't want to accidentally glue your fingers together. Let this dry overnight (just to be on the safe side)

Step 4:
   Finally, take your items you bought for the middle of the advent calendar and glue them in the middle square part. Wait for those to dry and the enjoy!!!

So that is it guys! It's pretty easy other than the length of time this DIY takes. I love the way this turned out. My decor for Christmas tends to be Rustic and I'm glad that it really turned out rustic and goes so well with my decor. I hope you all enjoyed this post! Send me a link or comment down below with a picture if you decide to tackle this project! Thank you so much for stopping by. Be sure to come back for more posts - I plan on doing a few more DIYs this Holiday Season! Until next time, Happy Holiday Crafting! xo

Sunday, 27 November 2016

Deck The Halls with Brittany: DIY Christmas Carol Canvas

Hey Everyone!

Hope you are enjoying your weekend so far! I sure am. I have just started watching the new Gilmore Girls episodes... and so far so good! Well, as you can see I am starting my “Deck the Halls with Brittany” series again for the holidays! This series will be on both of my blogs and my Youtube channel, so be sure to check them all out! Not all the content will be the same! With this being said, I am bringing you my first Holiday DIY of the year! I made a Christmas Carols Subway Art Canvas.
Things You Will Need:
  • canvas
  • paint
  • paint brush
  • alphabet stamps
  • sealant spray
  • markers in colours of your paint

Step 1:
Choose your first Christmas Carol and collect the stamps you will need for it. Then take the paintbrush and evenly coat each letter one at a time. Press the stamp down onto the canvas, one at a time until you finish the first carol. 

Step 2:
Repeat this process swapping out the paint colours. You want to make a pattern. For me, it was red, grey, dark grey, red, grey, dark grey etc. Repeat this until you have completed the entire canvas. 

Step 3:
Set the canvas some place in your home where it won't be disturbed while it is drying. 
Step 4: (** I had to use marker over my paint because it didn't come out as opaque as I would've liked)
Once it is dry, you can go over it with the markers and then spray it with a sealant spray so that the paint is protected and so is the canvas itself.  Once the sealant has dried, hang it in your house and enjoy! 

And that is all! Wasn't that easy? It is a bit time consuming, but totally worth it! I hope that you all enjoyed this little DIY holiday project! Be sure to show me pictures of your canvas - I would love to see them! Also, be sure to subscribe to this blog, The Britt Report (Lifestyle/Everyday blog) and my Youtube Channel (Queen Bree) as I have a lot of Holiday content coming up! Thank you so much for stopping by! Until next time, Merry Christmas and Happy Holidays! xo


Monday, 31 October 2016

Happy Fall Y'all: DIY Hello Fall Canvas Art

Hi Everyone!

I hope everyone is doing well on this lovely but somewhat chilly Thanksgiving Saturday. I am looking forward to spending the day with lovely company and eating a ton of yummy foods! Anyway, I just wanted to share with you a DIY project that turned out rather well. It doesn't cost too much and isn't too time consuming! Here is what you will need...

- a canvas (in your preferred size)
- faux fall leaves
- hot glue gun
- hot glue gun sticks
- paint
- paintbrush
-gold marker

Step 1:
Take your canvas, your paint and paint brush and paint the entire canvas. I chose black because it makes everything pop but you can choose whatever colour you want. Set the canvas aside to dry.

Step 2:
Once the canvas is dry, take your leaves and place them on the canvas until you are satisfied with how it looks. This is to give you a rough idea of how everything will look when completed.

Step 3:
Next, take your glue gun and start gluing the leaves to the canvas. Be sure to be careful, as the glue might seep through the faux leaves and can burn you.

Step 4:
Once you are done gluing, unplug your glue gun and then take your gold marker and write out whatever Autumn phrase you chose onto the canvas, where you want it to go. If it is easier, you can use a pencil first and a ruler. You can tweak it if needed.

And that is it! Be sure to hang it where you can admire it. It is an easy project that is really hard to mess up. I hope you all enjoyed this tutorial. Be sure to come back for more. I apologize for things being crazy.... I am going through a period of transition so I am hoping that it will start to get back to normal so I can post more regularly. Thanks again for stopping by and until next time, Happy Crafting! xo


Friday, 30 September 2016

It's Fall Y'all: DIY Plaid Fall Coasters

Hi Everyone!

I hope you are all enjoying this cloudy Fall Friday lunch hour! I thought it was about time I brought you all a new DIY. I have been busy doing a bunch of DIY-ing so be prepare for some more Fall/Halloween stuff coming soon!

So in this DIY project, we are going to be Plaid Coasters for Fall. I saw this idea on Pinterest and thought it was the cutest thing, so naturally I had to attempt this for myself. The project is relatively easy but time consuming so be sure to set aside some time and perhaps binge-watch your favourite show on Netflix at the same time! I will also have a Youtube video of me making this DIY so if you are more of a visual person, then look below for my link to my channel.

The things you will need:
- Plaid Material
- Felt (doesn't matter what colour as you won't see it)
- Sewing thread
- Sewing Needle
- Scissors
- Pins

** If you don't have thread or a sewing needle, you can substitute those two items for a hot glue gun and glue sticks.

Step 1:
Cut the plaid material into squares approximately 4.5 inches by 4.5. Remember that you want to have a little bit of space to be able to sew or glue the two pieces together, but you want it to be big enough to fit the glass or mug on it.

Step 2:
Once all of your plaid material is cut into squares, do the same thing with the felt, cutting it a bit smaller. Don't worry if it doesn't fit at this moment or you cut it too big, you can always trim it down later.

Step 3:
Take your two plaid squares and pin them together (if you need to). Be sure to leave one side open so you can turn it right side out. Then begin to sew (or glue) them together. Do this until you have secured three sides. Then cut the string, leaving enough to tie it. Once you have tied it off, you can cut the little tail and turn it right side out.

Step 4:
Take your piece of felt and put it inside the little pocket you have made. If you need to trim it, do so now. Once you have it inside, fold the two open pieces down inside the pocket. Pin them together so that you have shut the square completely. Then sew the opening shut, using a criss-cross pattern on the inside of the two flaps. ** If you are gluing instead of sewing, this part can be tricky so I would suggest pinning it together and then one by one taking the pins out and gluing on section at a time.

Step 5:
Once you have finished sewing the flap shut, tie it off. Once you have tied it off, cut the little tail off and you are done. You have a beautiful plaid Fall coaster. Continue this however many times you want until you have the desired number of coasters.

Anyways, that is all there is to it! Like I said, it is time consuming but not necessarily hard. So grab your supplies, your computer and turn on Netflix and get crafting! I hope that you guys enjoyed this tutorial. Look below if you would rather watch my Youtube video on how to make these awesome coasters! Thank you all for coming to check out this blog post and until next time, Happy Crafting! xo


Happy Fall Y'all: DIY Autumn Coasters Video:
https://www.youtube.com/watch?v=01ZahViFKB8
My Youtube Channel:
https://www.youtube.com/channel/UC4HLUixems2ln2CfNguupjQ
The Britt Report Blog:
http://brittreport.blogspot.ca/

Wednesday, 15 July 2015

Summer Fun: DIY Door Wreath for Canada Day!

Hi Everyone!

I'm back with a DIY home decor post. I know Canada Day has passed, but I figured I would post this anyway. Its a fairly easy project that doesn't take too long to make. Let's get started, shall we?

Things You Need:
-round, styrofoam wreath
-burlap
-Canada Day garland
-Canada Day bow
-Glue gun
-Glue sticks

Step 1:
Take the styrofoam wreath and the glue gun and use it to wrap the burlap around the wreath.Do this quickly because the glue will dry fast.

Step 2:
Next, glue the Canada Day garland around the top of the wreath. See the picture to the right.

Step 3:
Next, glue the bow to the bottom of the wreath. There was a twist tie but I couldn't get it to stay very well. Gluing it worked way better.

Step 4:
Finally, hang the wreath at your front door or wherever you are going to hang it.

I hope you enjoyed this little DIY project for Canada Day. I'm sorry it came too late for Canada Day but perhaps you can use it for next year. If you do end up making it, please let me know by commenting in the comment box below. Until next time, Happy Crafting! xo


Monday, 6 April 2015

Spring Thaw with Brittany: DIY Easter Banner

Hi Everyone!

So I'm back today with another Easter DIY decor post. Today, we will be making a simple and affordable Easter banner. You won't need very many supplies and it isn't very time consuming. Let's get started!!!!

Things You Need:
-scissor (or a paper slicer)
-card stock
-printer (with colour ink)
-ribbon
-computer
-hole punch

Step 1:
So the first step will be to google printable banner ideas for easter. I actually found this one on Pinterest and the template was free to download. Once you have found one you like, save it to your computer.

Step 2:
Print it out. Then taking your scissors or paper slicer, cut each banner piece out. Once you have cut them out, take your hole punch and punch two holes at the top of each banner piece. NOTE: Be careful to not punch them too close to the edge. You don't want it to rip apart.

Step 3:
Once you have punch out the holes, take your ribbon and thread it through the holes until all of your banner pieces are on the ribbon. Knot each end so the banner won't come off.

And that's it! You have a simple and really cute Easter banner. You can hang it wherever you like. I hung mine above my TV with some white lights (To see this, be sure to come back from time to time to see my Spring/Easter Decor in the next week)! If you attempt to do this DIY, be sure to let me know in the comments below. You can leave me a pic or send me a link to your own posts. I love checking it out! Until next time, Happy Easter!

Monday, 30 March 2015

Spring Thaw with Brittany: DIY Glitter Easter Egg Picks for Flower Arrangements!

Hi Everyone!

I hope everyone is enjoying their Monday afternoon! I'm back with another post for those who are getting into Easter decorating. This is a simple and affordable project. It is also not all that time-comsuming. The most time spent is waiting for things to dry. Today, we will be making our own glitter eggs for flower or plant arrangements. I couldn't find any I liked in the Dollar Store so I figured I would make my own. Let's get into it!

Things You Need:
-scissors
-skewer sticks
-plastic eggs
-fine glitter
-white glue
-paint brush
-clear sealant spray (you can also use hairspray if you don't have sealant spray)

Step 1:
Cut the skewer sticks in half. I made 8 eggs so you will need four skewer sticks.

Step 2:
Stick the skewer stick into the hole at the bottom of the egg. Push it through to the whole in the top. Try to get it in the top hole but not so far that it sticks out noticeably.

Step 3:
Take your paintbrush and white school glue and cover the egg. Be sure to apply a generous amount (Because of the plastic the glue will separate and so not all of it will be covered in glitter).

Step 4:
Take the glitter and pour it all over the egg. Be sure to be turning the egg to get all of it covered. Put it aside. Repeat the last four steps with all your eggs.

Step 5:
Once you have completely glittered all the eggs, take your sealant (or hairspray) and coat it with a thin layer. Be sure to get all areas of the egg. Set aside and let them dry.

And there you have it! You have lovely glitter eggs to put in your flower or plant arrangements. You could hot glue little loops of string on them and hang them on your mantle from a string as well. You can really do a lot with these little guys. Well, I hope you enjoyed this post! Let me know if you tackled this project by leaving me comments, pictures or links to your posts in the comments box below. I love hearing from you guys! Until next time, Happy Easter! xoxo

Friday, 27 March 2015

Spring Thaw with Brittany: DIY Easter/ Spring Wreath!

Hey Everyone!

So I'm back with another DIY post and with Spring having just arrived and Easter coming up fast, I figured I would start writing about some Easter and Spring DIYs.

This DIY will be an Easter/ Spring Wreath and is a pretty time consuming project. It has taken my awhile to finish and I've changed it and added to it because I wasn't happy with it. With that, let's talk about the things you will need for this project!

Things You Need:
-some sort of wreath (I used a gold ring that was similar in diameter to other door wreaths)
-scissors
-pencil
-chalk marker
-mini burlap banner pieces
-glitter foam sheet
-tulle in your preferred colour
-flower clips
-bird clip (optional)
-chalkboard clothes pin
-yarn or ribbon
-mini clothes pins
-butterfly clip (optional)
-velcro stickers
-fabric marker

Step 1:
Take your tulle and cut it to the size you want. Remember that you will be folding it in half and attaching it to the gold ring so make sure you double it when you figure out the length. I think I made mine about 3 inches (so 6 inches doubled). Cut about 50-100 pieces. It will depend on how big your gold ring is.

Step 2:
Take each piece of tulle and fold it in half, making a loop on the one side. Wrap it around the ring and pull the loose ends through the loop. Pull it tight to make sure it is secure to the ring. Do this until the entire ring is full and covered.

Step 3:
Once you are finished putting the tulle on, take your glitter foam and cut a bunny out of it. If you aren't so great at free-handing animals, you can always go on Google and search 'bunny silhouettes' like I did. If you do this option, trace it out on the back of the foam sheet and then cut it out. After you have cut it out, take some of the velcro stickers and put one on the back of the foam bunny and the other on the tulle where you want the bunny to sit.

Step 4:
Next, take all your flower clips (and your birds and butterflies if you opted for these clips as well) and arrange them on the wreath by clipping them on the tulle. I found you have to attach the clips to one or two pieces of tulle to make it more sturdy.

Step 5:
Next, take your chalkboard clothespin sign and your chalkboard marker and write 'Happy' on it. If you aren't good in the calligraphy area, you can always print something out or use alphabet stickers instead. Clip it to the wreath (make sure you figure out where you want to place the sign first, so that you write on the sign right side up!)

Step 6:
Finally, take the little burlap banner pieces and take a fabric marker and write the letter to spell out "Easter" on each of the pieces. Let it set for a few minutes. Then take the string and run it through the holes in each banner piece. Once everything is strung through, take your mini clothespins and attach either end to the wreath.




That's it! You have completed your very own Easter Wreath. What I like about this wreath is that I can take things off and use it again for another season or holiday. I used the wreath for St. Patrick's Day and just took everything off, packed it away and started from a (nearly) clean slate. Like I said, this wreath was rather time consuming, but is definitely more affordable than those wreaths you can find at places like Michaels. If any of you decide to make an Easter wreath, be sure to leave me a picture or a link to your own posts down below in the comments. I would love to see what you come up with! Until next time, Happy Easter! xoxo

Tuesday, 17 March 2015

St. Paddy's Day with Brittany: DIY Wreath for the Front Door.

Hello Everyone! 

Hope you all are having a fabulous St. Paddy's Day. I'm bringing you my last DIY post having to do with this Irish Celebration. This one is fairly simple and fairly cheap to do. It probably took me, like, an hour tops! Let's get started!!!

Things You Need:
-scissors
-velcro circles
-tulle
-metal ring
-foam shamrock 
-wire garland

Step 1:
Decide how long you want your tulle to extend out. Cut a lot of strips of tulle. I'm not sure how many I cut... I would say something like 50-75 strips. 

Step 2:
Once you have the strips cut, start tying them onto the metal ring. To do this, you need to fold the strip of tulle in half, forming a loop. With the strip still folded in half, put it around the metal wire. Then slip the two ends of the tulle through that loop that you made. Pull it tightly!

Step 3:
Next, do Step 2 until the entire metal ring has been covered. Once you have finished, fluff it out if it needs it. Place one side of the velcro on the tulle and press it down firmly. Press the other piece of the velcro pair to your foam shamrock. Place the foam shamrock on the wreath (I did this so I could reuse the wreath for Easter/Spring). 

Step 4:
Finally, take the wire garland and cut off a strip of it. Wrap one end around one side of the wire ring and then take the other end and do the same on the opposite end. Once it is secure, you are finished. One thing I will mention is to make sure you don't secure the garland too securely, if you are going to repurpose this into a Spring/Easter wreath! 

And that is how you make this simple and cute St. Patrick's Day Wreath! Wasn't that easy? I hope that you enjoyed this tutorial. If you make this yourself, be sure to leave me pictures or links so I can see your creativity! Until next time, Happy St. Patrick's Day!!! xoxo


Sunday, 15 March 2015

St. Paddy's Day with Brittany: DIY "Lucky" Banner

Hi Everyone!

Wow! Can you believe St. Patrick's Day is nearly here?!?!?! I sure can't! In the spirit of the month and the awesome holiday of St. Patrick's Day, I thought I would bring to you a DIY to help you, if you were thinking about decorating your house for the occasion. You will need to have some time to kill because it is a tad time-consuming. It is a fairly inexpensive project and it turned out really good!
Shall we get started?

Things You Need:
-scissors
-green card stock
-ribbon
-foam 4 leaf clovers
-alphabet stickers
-glue gun
-glue gun sticks
-hole puncher
-ruler
-pencil

Step 1:
Take your green card stock and divide it into four equal rectangles. Do this with the second piece of card stock as well. Cut out each rectangle.  You want to end up with 7 rectangles.

 Step 2:
Once the rectangles are all cut out, take a hole puncher and punch two holes in each rectangle. If you want, you can cut a triangle shape out of the bottom of the rectangle cards. This will change it to look more like a banner. To do this, I folded one of the cards in half, lengthwise, and cut on an angle starting at the outer corners. Unfold that first card and then use it to cut the rest of the cards by placing it on top of each of the other cards.







Step 3:
Plug in your glue gun. Once it is ready, start gluing your foam four-leaf clovers onto the card stock. Let them dry.



Step 4:
Once the foam four leaf clovers are all glued on the card stock, start putting the alphabet stickers on five of the four leaf clovers. I spelled the word LUCKY. I found these stickers weren't great for sticking on foam so I actually hot glued them onto the foam.
Using the ribbon you have chosen, string it through the holes you punched out earlier. Be sure to space them evenly apart.





And there you have it! You have made your very own St. Patrick's Day banner. I hope that you all enjoyed this post! If you decide to make a banner, be sure to leave me pictures or the link to your post in the comments below. I will be sure to check them out! Until next time, Happy St. Patrick's Day! xoxo

Friday, 20 February 2015

Valentine's Day with Brittany: DIY Gift Ideas for Him!

Hi Everyone!

I hope you all are doing well on this wonderful Friday evening. Currently, I am sitting in my mom's living room waiting for my sister to get off work..... Impromtu visit home for the weekend. So while I am waiting, I thought I would get some writing done. So here I am with my final DIY Valentine's Day post. Today, I'm writing about a couple of DIYs that you can make your special guy for Valentine's Day or for another special occasion. Let's get started with the first one!

Things You Need:
-piece of wood
-3/4" Finishing nails
-embroidery floss (the colours are you choice)
-hammer
-stickers or markers (optional)

Step 1:
Remove the sticker from the piece of wood if need be. I bought my piece of wood at Walmart and there was a massive sticker on the front. After you have removed it, sand it with a light grit sand paper (if you feel this is necessary).

Step 2:
Print out a template of the shape you are using. For example, I printed a map  of my husband and mine's hometown area. Other versions I have seen have used States or provinces. Be sure to make the area that means something to the both of you... or to him. Once you have printed it out, cut it out. Then tape it down to the piece of wood.

Step 3:
Once the map is securely taped down,  start taking the finishing nails and hammer them about half way into the wood (You want enough to stick out so that you will be able to wrap the string around it). Make sure to space them about 1cm apart. Do this until you have outlined the entire outside of the shape you have used. If you are doing something similar to what I did, take some nails and make the shape of a heart around the spot that means something to you.

Step 4:
Next, carefully peel the map or shape template off the piece of wood. The nails should not move. Once your template has been removed, take the one end of your embroidery string and tie it to a nail. Then bring it down to the heart and loop it around one of those nails. Bring it back up to the next nail and repeat until every nail has been covered. [NOTE: Depending on how big your heart is, you may need to put multiple loops on the heart nails so that each border nail has an anchor to the heart]. Once you get to the last nail, you can tie off the string and cut any tails off.

Step 5 (Optional):
If you want, you can put a saying using marker or stickers some place on the board. For me, I put "Where We Began..." because the template I used was the area where my husband and I met. It is also both of our hometowns. I had some kraft paper alphabet stickers that were the perfect size, that I bought at Dollar Tree.

And that's it! You have completed your first little DIY present. This one can be time consuming, so be sure to put aside some time to do it. If you work at this and don't stop until it is done, it shouldn't take more than 2 hours. It was a budget friendly project and it turned out great!

The next project is another time consuming project, but doesn't require you to hammer nails into a piece of wood. This is also a gift that the both of you can enjoy and you can have fun planning a bunch of date ideas for the next 12 months.

Things You Need:
- 12 envelopes
- 12 rectangular pieces of cardstock
- markers
- stickers
- Washi Tape
- Baker's Twine
- 8.5x11" piece of cardstock
- ruler
- scissors

Step 1:
Get or make 12 rectangular pieces of cardstock. They need to be able to fit inside the 12 envelopes you have chosen to use. Outline each of the 12 pieces of cardstock with a red sharpie marker.

Step 2:
About a half inch to an inch down from the top outline, draw a line with the red sharpie 3/4 of the way across the cardstock. Next to this line put a sticker or other decoration. Write the month above the red line you just drew, in black Sharpie. Repeat this for all the 12 pieces of cardstock until you have completed one for every month.

Step 3:
Next, using the black Sharpie, write out the plan for each date. If you plan on giving a lot of information, try to use a fine tip Sharpie ( or write it smaller than I did). Stick them into envelopes.

Step 4:
Use the washi tape to decorate the front of the envelopes. I kept it simple by just using one type of washi tape for each envelope and using the same one to seal the back part of the envelope. Repeat this for each envelope. Once the envelopes are decorated and sealed, tie them together using the Baker's Twine. Make sure to keep them in order so your special someone doesn't open the wrong envelope and the date for that month is spoiled.

Step 5:
Next, take the full sheet of cardstock and outline it in red Sharpie. Then take some washi tape and put it in the top two corners to make it look like the washi tape is what is holding the paper there. In black sharpie, write your own message or use the one I used: To Show That I Love You, Throughout All The Year, I've Made Up Some Date Nights, To Send You Good Cheer! Some May Be Big, And Some May Be Small, But The Time Spent Together, Is The Point Of It All! Lots of Love, Your name here. Then underneath where you signed your name, but a piece of washi tape almost all the way across (from red line to red line) and then put a sticker on top of the red line.


And that's it! That's all there is to it! This one is definitely easier than the other one. I had all these supplies on hand already so it was definitely cheaper than the first DIY. With these two DIY gift ideas, you can definitely tweak them to make them unique. I hope that you all enjoyed reading about these two gift ideas. If you make either of them, be sure to leave me a link to see your blog post about it or leave me pictures in the comments section. I really do enjoy hearing from you all! Until next time, Happy Crafting! xoxo

Monday, 2 February 2015

Valentine's Day with Brittany: DIY Valentine's Day Cards

Hi Everyone!

My Valentine's Day card I made from a Pin I found
So I'm back today with another Valentine's Day with Brittany DIY! This one is a little more time - consuming but is simple enough to make. Just make sure you set aside some time to do this little project. I'm really happy with how these turned out, especially considering I haven't had much luck making my own cards in the past! Let's get started!

Thing You Need:
-card stock
-supplies to decorate the cards with (ie. scrapbook paper, string, buttons, stamps, glitter etc)
-glue
-double-sided tape
-foam tape squares
-markers

Step 1:
Come up with a design for the front of your card. Great places to look are Pinterest and Google. I found a few cute yet simple designs I liked on Pinterest. You can also come up with your own if you are creative and have the time to design it.

Step 2:
Gather all supplies for your card. Once you have everything you need, you can begin to start making it.

Step 3:
This step will depend on what your design is like. For example, the card in the picture above required me to first find a picture of a puzzle piece. Then I had to trace and cut it out of my paper.

Step 4:
After that I chose my card stock and/or scrapbook paper and traced and cut out three different puzzle pieces. Once cut out, I lined them in black marker to make them pop.

Step 5:
Next, I laid them out on the card and figured out how I wanted them arranged. I then took double sided foam squares and attached them to the back of the puzzle pieces. I, then, attached the other side to the card in the layout I wanted.

Step 6:
Finally, I took my marker and wrote a little saying on the front. Because I did puzzle pieces, I wrote 'Love you to pieces' on the front. I left the inside blank so I can write a more personal message.

So that's it for this specific card. I did make a few others but I don't have pictures of them. If you are finding one on Pinterest, there is usually a link to tell you how to make it and what you will need for it! If you are doing one on your own, you can do whatever you like. Make it your own, even with the ones you find on Pinterest. Get creative with it! I hope you enjoyed this post. I thought it would be a great thing to post about seeing as there seems to be greeting cards for everything nowadays and greeting cards are so expensive. Be sure to leave me comments and pictures! I would love to see them and hear from you all! Until next time, Happy Crafting! xo

Wednesday, 28 January 2015

Valentine's Day with Brittany: Glitter Heart Canvas

Hi Everyone!

So I'm back and I'm kicking off my Valentine's day segment with this really easy and really affordable DIY for your home. It's a simple way to add a touch of Valentine's Day to your home that is subtle and looks great! All you need is a few things. This is stuff that you can find around your home or that you can get at the dollar store. Let's get started!

Things You Need:
-canvas (size doesn't matter - it's up to you!)
-paintbrush
-white paint
-pencil
-glitter in the colour of your choice (I went with red)
-white glue
-newspaper (or some sort of paper to help keep the glitter in check)
-a heart shape to trace (or you can draw one freehand if you are good at drawing hearts)
-sealer spray

Step 1:
The first thing you need to do is to prep your canvas. To do this, take your white paint and paint brush and just coat the canvas in a layer of the white paint. Put the canvas aside to dry.

Step 2:
While you are waiting, you can make your heart stencil. Just take a regular piece of paper. Fold it in half and then make half a heart shape. The two points need to meet the folded edge. Cut along the line you drew and unfold your heart. You can cut it more if you need to fix it.

Step 3:
Once your canvas is dry, take your heart stencil and place it on the canvas. If you need to, lightly put some tape on the back side of the stencil so it won't move around on you. Then lightly, trace around the heart shape. Once complete, take the stencil off the canvas carefully.

Step 4:
Now, take your clean paintbrush and your glue. Put about a quarter sized amount in the middle of your heart (the amount will depend on the size of your heart). Spread it around evenly, making sure to put glue on top of your pencil lines so they won't show. Be a little generous with the glue. If you put too little on, the glitter will not stick properly.

Step 5:
Once you have all the glue spread out evenly, take your glitter and shake a generous amount in the middle of the glue. (Do not worry - you won't be wasting it. You can dump it on a paper and put the excess back in the container afterwards). Carefully, spread the glitter around making sure that all the parts with glue are covered. (The easiest way I found to do this was to beat the bottom of the canvas gently, making the glitter jump around).

Step 6:
Once all the glue area is covered, dump the rest of the glitter onto a piece of paper and tap the backside of the canvas to get any loose glitter off. Then set the canvas aside to dry (This is where you can take the piece of paper and pour the excess back into the container).

Step 7:
Once the canvas has dried, take your sealer spray and spray the front of the glitter. This will lock in the glitter so that none can fall off and get all over the place. You may have some fall off but it won't be nearly as much as it would be if you didn't spray it. Set it aside to dry.

Once it has dried, you are now ready to use it to decorate your home! I hope that you enjoyed this little tutorial. Like I said, it is quick and easy and can be personalized to the individual. You don't have to do hearts. It is totally up to you! Until next time, Happy Crafting! xoxo

Valentine's Day with Brittany: DIY gift idea for your friends!

Hi Everyone!

It's Brittany and I'm back with another Valentine's Day post for my Valentine's Day Segment. Today, I am bringing you a cheap, easy gift you can make for your friends for Valentine's Day. You may have some of these things in your house already and other stuff you can buy at places like Target and Dollar Tree. Let's get started!!!

Things You Need:
-little brown paper bags/white favour boxes
-glitter (colours of your choice)
-glue
-paintbrush
-heart template
-pencil
-scrap piece of paper
-ribbon or clothes pin (or whatever you want to close the bag with)
-gift tags (if you are giving gifts to friends)

Step 1:
Take your heart template (I made mine from a scrap piece of paper) and place it on your little brown paper bag (or white favour box). Lightly trace around the heart stencil.

Step 2:
Take your white glue and a paint brush and generously spread the glue all around the heart shape. Be sure to go over top of the pencil lines so that it gets covered with glitter and doesn't show.

Step 3:
Pour some glitter into the centre of the heart and lightly tap on the bottom of the bag to move the glitter around. I recommend doing this over a piece of scrap paper as glitter tends to get everywhere. Do this until you cannot see anymore glue. Then dump the excess onto the scrap piece of paper. You can put the excess back in the container once all your bags are decorated.

Step 4:
Put it aside to dry. Do this to the rest of your little bags (or favour boxes). Let them dry.

Step 5:
Once everything is dry, you can open them up and fill them with whatever you would like to give. I have those hair ties that don't leave kinks in your hair, a lip balm and a little packet of chocolates. I also plan on making little cakes to go in my white favour boxes.

Step 6:
Once you have everything in your little bags, fold the top over and close it shut with whatever you have chosen to close it with. I didn't get a picture of it, but I closed it with a clothes pin. I also attached a tag with each friend's name on it.

So there you have it. Simple and easy, but also really shows you care. If you want to make multiples, like for your child's classmates, you could just put the same thing in each bag and then close them with a clothes pin or sticker. That way, your child can just hand them out to each classmate and not have to worry about missing someone. Anyway, I hope you enjoyed this DIY for Valentine's Day! If you try this DIY, be sure to leave me comments and pictures in the comments section below. Until next time, Happy Crafting! xo